Quotes   |   Order
  Price and Information Guide
     • 2015 - 2016 Cellular Shade Price Guide
  Product Specifications
     • Custom Corded Cellular Shade
     • Custom Clutch Cellular Shade
     • Custom Cordless Cellular Shade
     • Stock Cellular Shade
     • Stock Cordless Cellular Shade
     • Regular and Specialy Shapes Chart
     • Double Cell 
     • Motorized 
     • Crush & Sheer Fabrics 
  Color Swatches
     • Single Cell - Light Filtering
     • Single Cell - Room Darkening
     • Single Cell - Point Bond
     • Double Cell 
     • Crush & Sheer Fabrics 
     • Slub Woven 
  Installation Guide
     • Cellular Shade Stock Cord Control 
     • Polaris™ Clutch System
     • Polaris™ Cordless System
  Picture Gallery
     • Picture Gallery
  How To Measure
     • How To Measure
Measure each window individually as sizes may vary. Record width first, then height (length) to the nearest 1/8. Measure width from left to right, height from top to bottom using a metal tape measure. PLEASE DO NOT USE A CLOTH TAPE!
Inside Mount
Inside mount blinds are installed inside the window frame.
  1. Measure the exact inside width of window frame from one inside edge to the other. Take three measurements, one near the top, one in the center and one near the bottom. Record the narrowest measurement.
  2. Measure the exact height in three places, left, center and right from top edge of opening to top of sill. Record the longest measurement for horizontal blinds.
  3. Do not take deductions on inside mount measurements. The factory will take an 3/8 allowances for operating clearance.
  4. Measure the window diagonally in two places as shown. If the two diagonal measurements are not the same, we suggest an outside mount application for the best shade performance and appearance.
Outside Mount
Outside mount blinds are installed outside the window frame, covering an area larger than the window itself.
  1. Measure the exact width of area to be covered. Be certain the measurement overlaps the window opening by at least 1 1/2 on each side to ensure privacy and light control.
  2. Measure exact height to be covered, including desired overlap (usually from top edge of molding to bottom edge, or to top of sill). If there is no sill, measure to where the blind is to reach.
  3. The factory does not make deductions for an outside mount.
Main Office:    770 S. Epperson Drive, City of Industry, CA 91748
Telephone:    (626) 839-8866            Toll Free:    (800) 879-9512            FAX:    (626) 839-8861
Home      |      About Us      |      Contact Us      |      Dealer Sign-Up      |      Dealer Login      |      How to Measure
Quotes      |      Order Forms      |      Terms of Sale      |      Product Warranty      |      Site Map
Copyright © 2015 HT Window Fashions, All Rights Reserved.